Chemical Guys Srbija

Top sellers

V36 OPTICAL CUT POLISH

the latest polishing paste formulated with the hybrid nano technology. It is designed for fine polishing. It is suitable for basic machine rotary polishing with the PORTER CABLE 7424 Orbital polisher (code: BUF_100.1XP) and for quickly and evenly removing medium paint defects (to 2500 grit sanding),  such as minor scratches, holograms, mild oxidation, matte whirls and similar imperfections...

More details

3 300,00 RSD Tax excluded

  • 473 ml
  • 118 ml
  • 946 ml
  • 3 780 ml

 

This water-based polishing paste for perfectionists, without silicones, fillers or oils is designed for fine polishing using abrasive micro particles that fall apart. This hybrid nano technology quickly and reliably removes minor imperfections of paint (to 2500 grit sanding), minor scratches, holograms, mild oxidations, matte swirls and other similar imperfections of paint caused by regular car operation or mechanized car washes. When applied by machine rotary polishing, the product delivers high shine with maximum optical clarity and deep wet finish to your paint. V36 restores light, as well as dark paints, delivering long-lasting antistatic protection which perfectly prevents dust and dirt from clinging to surface. It is suitable for all types of paints. It is great for new cars with new paints, as well as for older and overhauled paints. The product is formulated with an evolutionary nano technology that guarantees 100 % success, eliminating the risk of surface damage. It contains abrasive micro particles that fall apart to smaller ones during the application. It works as a special compound which turns into polishing wax during the polishing process. This dust-free technology of gradual break-down of abrasive particles guarantees perfect, even and strainless polishing of your car paint without stains or matte whirls. It can be applied by hand or using a special eccentic (orbital) polisher and polishing pads.  We recommend that you use HEX - LOGIC pads for machine polishing - it is the most advanced latest pad technology.  It maximally complies even with the most demanding requirements.

 

APPLICATION BY HAND:

  • shake the product well before use
  • before you apply the product the paint needs to be perfectly clean and freed of all asphalt stains and ingrained road dirt, and optimally decontaminated with the decontamination bar (clay) (code: CLY_202_180 GR) and the lube (code: WAC_CLY_100_16)
  • apply a thin coat of the product to the clean and decontaminated surface using a foam applicator or microfiber towel of a quality cotton/microfiber
  • we recommend that you use Chemical Guys applicators
  • for hand polishing use special HEX BUFX_201 /  BUFX_202  /  BUFX_203 pads
  • always work on an area of maximum size 60 cm x 60 cm at a time
  • immediately after you finish application on individual parts of the bodywork polish the surface of each part perfectly with a soft microfiber towel Monster Extreme Thickness Microfiber MIC_1100.
  • to deliver the final coat you need to apply finishing product V38 OPTICALFINAL POLISH (code: GAP_V36_16)

 

After you finish polishing, always use one of Chemical Guys synthetic waxes:

WAC_118_16 JET SEAL 109 or BLACK – SIGNATURE PASTE WAX SINGLE JAR,

SS6 SECOND SKIN HYBRID VEHICLE COATING SYSTEM.

For final treatment use one of Chemical Guys natural waxes:

PETE’S 53‘ – PEARL SIGNATURE PASTE WAX,

5050 LIMITED SERIES  CONCOURS  PASTE  WAX,

CELESTE DETTAGLIO – CARNAUBA PASTE WAX

 

APPLICATION BY MACHINE:

  • shake the product well before use
  • before you apply the product the paint needs to be perfectly clean and free of all asphalt stains and ingrained road dirt, and optimally decontaminated with the decontamination bar (clay) (code: CLY_202_180 GR) and the lube (code: WAC_CLY_100_16)
  • always work on an area of maximum size 0,6 x 0,6 m at a time
  • this fine polishing paste is suitable for the cutting pad HEX - LOGIC MEDIUM BUFX_102HEX6, BUFX_106HEX6  or  BUFX_105HEX6. Choose the diameter of the pad according to the size of a backing plate. Put 5 major drops of the product (about 1cm) on the pad spirally from the centre to the edge of the pad and turn it by 30 degrees. The distance between individual drops should be 1 - 2 cm, depending on the pad size.
  • take the pad with applied cutting paste and evenly make 4 - 6 imprints on the chosen surface of the bodywork
  • start the polishing at about 600 RPM speed (first gear) and apply the paste to the whole chosen area. Then polish at 1500 to 1800 RPM speed as needed
  • use only the weight of the polisher to do the polishing, do not push!!
  • work crosswise - horizontally and then vertically, bit by bit until the paste forms a transparent film. Then wipe the surface with the soft Monster Extreme Thickness Microfiber MIC_1100  and check the condition of paint from different angles. Repeat the application if needed. If you do so, you need to add adequate amount of the product to the pad.
  • after the application the paint is shiny and thanks to nano ceramic layer resistant to regular scratches.
  • after the application you need to use the finishing product V38 OPTICAL FINAL POLISH (code: GAP_V38_16)

 

 

RECCOMMENDATION:

After you finish polishing, always use one of Chemical Guys synthetic waxes: WAC_118_16

JET SEAL 109 or BLACK – SIGNATURE PASTE WAX SINGLE JAR, SS6 SECOND SKIN HYBRID VEHICLE COATING SYSTEM.

For final treatment use one of Chemical Guys natural waxes:

 PETE’S 53‘ – PEARL SIGNATURE PASTE WAX, 5050 LIMITED SERIES  CONCOURS  PASTE  WAX, CELESTE DETTAGLIO – CARNAUBA PASTE WAX

 

ADVANTAGES OF HAND APPLICATION:

  • very easy application and polishing off delivering wet-look shine effect
  • an easy application can be done in high temperatures, even in direct sunlight
  • maximum effect can be achieved with dark paint shades, as well as other shades.
  • the product guarantees long-term impregnation and protection against UV light for up to 1 year.
  • there is no product residue on rubber and plastic parts of your car after the application.
  • on horizontal surfaces (bonnet, roof and boot lid) apply the product with a backward-and-forward motion. On vertical surfaces apply the product with a side-to-side motion.                                                                                                                                                           - apply the product softly and do not push.
  • apply the product and polish it off one part at a time
  • let the product dry for a while

 

ADVANTAGES OF MACHINE APPLICATION:

  • the quickest and easiest way of removing moderate paint damage, scratches, oxidations, holograms and whirls
  • it easily restores shine of matte, faded and old paints (to 2500 grit sanding) without leaving usual matte stains, while delivering a consistent shine to the whole treated surface.
  • its wide scope and perfect technology reduce number of passes of the pad
  • it is very effective and saves time and strain
  • -it ensures perfect protection of paint against damage caused by cutting and delivers high and clear final shine without  scratches and holograms.